The small chain wheel shaft is provided with a small chain wheel, and the end portion of the small chain wheel shaft is connected with a hand crank.
|
L’eix de la roda de cadena petita està proveït d’una roda de cadena petita, i la part final de l’eix de la roda de cadena petita està connectada amb una maneta.
|
Font: AINA
|
A torque of value N is applied in a clockwise direction to the wheel axle.
|
S’hi aplica un parell de valor N en sentit horari a l’eix de la roda.
|
Font: AINA
|
f) Get out from the track (wheel axle out from the section band): 3 points
|
f) Sortir del circuit (fora de la cinta amb un eix de la roda): 3 punts
|
Font: NLLB
|
The front fork 11 allows steering while supporting an axis of the front wheel 3.
|
La forquilla davantera 11 permet la direcció mentre suporta un eix de la roda davantera 3.
|
Font: AINA
|
It incorporates the motor in the axis of the front wheel and the torque sensor in the area of the pedals.
|
Incorpora el motor a l’eix de la roda davantera i el sensor de parell a la zona dels pedals.
|
Font: AINA
|
The wheel shaft 11 is rotatably installed in the front frame 21 of the frame portion (2).
|
L’eix de la roda 11 està instal·lat de forma giratòria al marc frontal 21 de la part del marc (2).
|
Font: AINA
|
These holes may be eliminated, with the sparking wheel axle being retained exclusively by the holes in the head frame 12.
|
Aquests forats poden ser eliminats, quedant l’eix de la roda espurnejant retingut exclusivament pels forats del marc de cap 12.
|
Font: AINA
|
The driving wheel 1 is connected to the wheel shaft 11 so that forward and backward movement is possible.
|
La roda motriu 1 està connectada a l’eix de la roda 11 de manera que és possible el moviment cap endavant i cap enrere.
|
Font: AINA
|
2, because wheel shaft and handle are all divided into folding two parts, therefore can be easily when carrying.
|
2, perquè l’eix de la roda i el mànec estan dividits en dues parts plegables, per tant, es poden transportar fàcilment.
|
Font: AINA
|
Opposed holes 52 and 54 are formed in side walls 40 and 42 for the sparking wheel axle.
|
Es formen orificis oposats 52 i 54 a les parets laterals 40 i 42 per a l’eix de la roda d’encesa.
|
Font: AINA
|
Mostra més exemples
|